Toyota corolla panel removal tool

Then move to the area behind the door opener handle and pry out the round plastic screw cover with the small flathead screwdriver. Next, move to the bottom edge of the door pull handle and pry off the trim panel with a small flathead screwdriver.

If You need to replace Your entire exterior door on a Toyota Corolla the costs can add up pretty fast. The first screw is located behind the door opener handle. Pry out the small rectangular plastic screw cover using the small flathead screwdriver.

Remove the single screw with a Phillips head screwdriver and set it aside in a safe place. Then gently pry off the arm rest panel using a standard flathead screwdriver. A special hooked tool is available at auto parts stores that will detach the clip to the crank from the door panel.

However, you can also insert the edge of a rag behind the handle and rub it back and forth to dislodge the clip.

If the door has power controls for the windows or locks, pry the switch panel s off with a trim removal tool and unplug the electrical connectors. A large, flat-blade screwdriver or putty knife could work, but a specialized trim tool is often shaped to give you more leverage. You also need to pry off all trim panels on the armrest and door handle, as these panels conceal the main panel's mounting screws. To remove the trim cover near the mirror, use a small screwdriver to pry its retainers free from the doors; if the Corolla has manual mirrors, unscrew and remove the control handle.

Firmly tap in the pop rivet friction fasteners all along the bottom edge and both sides of the door panel. Replace the Phillips head screw behind the door opener handle and tighten it in the clockwise direction until it is snug. Line up the plastic trim panel over the door pull handle and gently push it back in to place to secure the friction fasteners. Line up the sail panel and gently push it back in to place to secure the friction fasteners.

Sit inside the car, close the door and verify that the door opener handle, door lock rocker switch, power window switch and power door lock switch all still work properly.

If you found this guide to be helpful, please consider making a small donation by clicking on the PayPal. Thank you! Note: I am not a registered charity. Donations are not tax deductible. Pictures Articles My Blog Home. Pictures Articles My Blog. Pry Off Sail Panel. Sail Panel Removed. This automotive maintenance tutorial was specifically written to assist owners of the eleventh generation , , , and Toyota Corolla in taking off the plastic interior door panels in order to upgrade the OEM speakers, add soundproofing material, fix a faulty electrical switch or replace a broken power window motor.

Disconnect Tweeter Speaker. Speaker Unplugged. Door Opener Handle. The first two steps are to lower the power window all the way down and then open the door. Pry Out Screw Cover. Screw Cover Opened. Pry Off Trim Panel. Then move to the area behind the door opener handle and pry out the round plastic screw cover with the small flathead screwdriver.

Door Pull Handle Cover. Plastic Trim Piece Removed. Loosen Counterclockwise. Gently pull off the door pull handle trim panel and set it aside in a safe place. Top Door Pull Handle Screw. Phillips Screw Removed.

Remove Lower Screw. Then remove the upper and lower screws in the door pull handle by turning them counterclockwise with the Phillips head screwdriver. Bottom Screw Removed. Insert Pry Bar Tool. Pull Out Plastic Pop Rivets. Insert the plastic automotive panel removal tool or a large flathead screwdriver in between the bottom edge of the door panel and the metal door frame.

Lift Door Panel Off Frame. Tilt Top Edge Towards You. Lift the plastic door panel up and off the metal door frame. Pull Back Plastic Tab. Release Top Clip.